Roland VP-770 사용자 설명서
95
System Settings
( SYSTEM)
message reception. Here we’ll explain the procedure for making system settings and what each system
parameter does.
Press the [MENU] button to access the MENU screen.
Use the cursor buttons or the value dial to select “System,” then press the
[F2] (ENTER) button.
[F2] (ENTER) button.
The SYSTEM screen will appear.
Use the cursor buttons or the value dial to select menu, then press the
[F2] (ENTER) button.
[F2] (ENTER) button.
The parameters are organized into several edit groups.
Menu
Description
Page
MIDI
Makes settings related to MIDI input/output.
p. 97
Sound
Makes settings related to sound output.
p. 98
Metronome
Makes metronome-related settings.
p. 98
Control
Makes settings for controllers such as the pedals and D Beam.
p. 99
Use the cursor buttons to move the cursor to the parameter that you
want to edit.
want to edit.
If not all parameters can be shown in a single screen, a scroll bar is shown at the right edge of the
screen. In this case, use the cursor [
screen. In this case, use the cursor [
] button to scroll the screen downward.
Use the value dial to change the value.
You can change the value in steps of one by pressing the cursor buttons [
] or [
]. If you want
to quickly increase the value, hold down [
] and press [
]. Conversely, you can quickly decrease
the value by holding down [
] and pressing [
]. You can change the value in larger steps by
holding down [SHIFT] and pressing [
] or [
].
Repeat steps 3–5 to edit the parameters as desired.
If you want to save the changes you made, refer to “Saving the
System Settings” (p. 96).
System Settings” (p. 96).
1.
2.
2.
3.
4.
✍
5.
✍
6.
7.
7.