Roland VP-770 사용자 설명서
99
Parameter
Value
Description
Metro Sound
Selects the sound of the metronome.
TYPE 1
Electronic metronome
TYPE 2
Mechanical metronome
TYPE 3
Pulse tone
TYPE 4
Beep tone
TYPE 5
Cowbell sound
TYPE 6
Stick sound
SYSTEM CONTROL
Here you can make settings for the controllers that are made at the system level.
SYSTEM KEYBOARD
Here you can make settings for the keyboard and aftertouch.
Parameter
Value
Description
Kbd Velo
REAL, 1–127
Specifi es the velocity value that will be transmitted when you play the
keyboard. If you want actual keyboard velocity to be transmitted, set this to
“REAL.” If you want a fi xed velocity value to be transmitted regardless of how
you play, specify the desired value (1–127).
keyboard. If you want actual keyboard velocity to be transmitted, set this to
“REAL.” If you want a fi xed velocity value to be transmitted regardless of how
you play, specify the desired value (1–127).
Kbd Velo Curve
Adjusts the keyboard’s touch.
LIGHT
Light weight synthesizer keyboard like
MEDIUM
Standard
HEAVY
Acoustic piano simulation
Kbd Velo Sens
-63– +63
Adjusts the sensitivity of the keyboard. As you increase this setting, higher
velocity values will be transmitted according to the force with which you
play. Normally you will leave this set at “0.”
velocity values will be transmitted according to the force with which you
play. Normally you will leave this set at “0.”
Aft Source
REGIST, SYSTEM
The assignments for the aftertouch can be stored individually in each
registration. When you select a diff erent registration, this setting specifi es
whether the aftertouch will be given the assignments stored in the
registration (REGIST), or the assignments stored in the system settings for
the entire VP-770 (SYSTEM).
registration. When you select a diff erent registration, this setting specifi es
whether the aftertouch will be given the assignments stored in the
registration (REGIST), or the assignments stored in the system settings for
the entire VP-770 (SYSTEM).
Aft Sens
0–100
Specifi es the Aftertouch sensitivity. Higher values will allow Aftertouch to
be applied more easily. Normally you will leave this at “100.”
be applied more easily. Normally you will leave this at “100.”
Aft Assign
Specifi es the aftertouch eff ect.
OFF
Off
MOD
Applies modulation.
DYN1
Changes the volume. Transmits MIDI message CC#2 (breath control) to the
sound generator section. This is the same operation as Voice Expression
(p. 66), and will operate only in the positive (+) direction to increase the
volume.
sound generator section. This is the same operation as Voice Expression
(p. 66), and will operate only in the positive (+) direction to increase the
volume.
DYN2
Changes the volume. Transmits MIDI message CC#4 (foot control) to the
sound generator section. For STRINGS and BRASS sounds, this allows the
volume to be controlled in the ± directions (it will not go to zero). For other
sounds, the volume can be controlled only in the “+” direction.
sound generator section. For STRINGS and BRASS sounds, this allows the
volume to be controlled in the ± directions (it will not go to zero). For other
sounds, the volume can be controlled only in the “+” direction.
FILTER
Changes the tone.
WAH
Applies a wah eff ect to sounds that support Wah.
BEND-DOWN
Lowers the pitch.
BEND-UP
Raises the pitch.
Aft Part
Specifi es the part(s) that will be controlled by aftertouch.
VOC/ENS
Vocal Designer part and Ensemble Part.
VOC
Vocal Designer part only.
ENS
Ensemble part only.
OFF
Off