Tektronix MTM400 사용자 설명서

Appendix A: Network Installation 

 

 

MTM400 MPEG Transport Stream Monitor User Manual 

ƒ 

The WebMSM software is installed on a client PC and allows the user to 
monitor and control the MTM400. The WebMSM can be used to monitor all 
compatible devices on a network (if the appropriate license is held). 

ƒ 

The Remote User Interface (RUI) software, based on the WebMSM, is 
downloaded and accessed from the MTM400 using a browser (Microsoft 
Internet Explorer with Microsoft Virtual Machine installed) of any networked 
personal computer.  

The provided HTML file allows you to open the RUI by typing in the URL 

http://<IP address>

 or network identity on a Web Browser on a client PC. The user 

permissions are set up to allow an Administrator to have read-write permissions 
and a User to have read-only permissions. 

When logging in, the default password for the Administrator is 'tek'; by default, the 
User does not require a password. 

Before proceeding, ensure that the following information is available: 

ƒ 

MTM400 MAC address: xx-xx-xx-xx-xx-xx 
 

Location 1: rear panel 

 

Location 2: main circuit board (internal) 

 

Location 3: instrument top cover (optional) 

ƒ 

MTM400 IP address: yyy. yyy. yyy. Yyy 
 

Assigned by network administrator 

ƒ 

MTM400 software license: zzzz-zzzz-zzzz-zzzz 
 

Location 1: instrument top cover (optional) 

The Transport Stream Processor board in the MTM400 unit is assigned a unique 
MAC (Media Access Control) address; this is also used as the unique address of 
the complete unit. The MAC address is printed on labels attached to the Processor 
card and the unit. 

The MAC address is written as six pairs of hex digits separated by hyphens, for 
example, '00-01-F8-A7-33-CC'. 

The MAC address must be associated with an IP address for the unit to be able to 
function within a network.