Philips V26CT 사용자 설명서
Loading Paper
Recording Functions 6-55
Note—
The first sheet will come out folded, as shown.
Cleaning the
Roller on
the Four
Channel
(M1117A)
Recorder
Roller on
the Four
Channel
(M1117A)
Recorder
If the paper doesn’t move through the roller properly, a possible cause is
that the roller needs to be cleaned. (Be sure your hands are clean before
touching the roller).
that the roller needs to be cleaned. (Be sure your hands are clean before
touching the roller).
Equipment
Required
•
Lint-free
cloths or wipes
•
Alcohol solvent that is low in water content. We recommend either
reagent grade denaturated ethanol or isopropanol (90% rather than
70%)
reagent grade denaturated ethanol or isopropanol (90% rather than
70%)
Directions
1. Turn the power off.
2. Open the door and remove any paper from the recorder.
3. Wipe the visible part of the roller with a saturated (but not dripping)
cloth. Rotate the roller with clean fingertips to expose the entire
surface and wipe the other side.
surface and wipe the other side.
4. Remove any excess liquid by wiping with a dry cloth.
Caution
The roller must be completely dry before using the recorder or you can
permanently damage the recording mechanism.
permanently damage the recording mechanism.
Step 3
Close the door. The paper should feed
automatically.
automatically.