NEC XM37 사용자 설명서

The Reset control allows you to return image parameters to factory presets.

The above warning statement will appear to confirm that you do want to reset

all raster settings. If you want to reset all raster settings, press PROCEED.

The following items can be reset:

H-POSI, H-WIDTH, PIN-CUSHION, PIN-BALANCE, PIN-CORNER, V-POSI,

V-HEIGHT, V-LIN1, V-LIN2, KEYSTONE, TILT and ROTATION.

The above warning statement will appear to confirm that you do want to reset

individual settings.

• In addition to OSM controls, adjustments can be directly accessed with the

remote control keys. When adjusting with the remote control keys, the on-

screen display for the related adjustment appears instead of the OSM

menu.

• When OSM ON/OFF is set at OFF in the System Control menu(see the

following section ), OSM controls are not available while the remote control

direct access is possible.

Specific adjustment
item to be reset.

The above warning statement will appear to confirm that you do want to reset all

visual settings.  If you want to reset all visual settings, press PROCEED.

The following items can be reset:

BRIGHTNESS, CONTRAST, COLOR, TINT, SHARPNESS, COLOR TEMP.,

R-GAIN, G-GAIN, B-GAIN, R-BIAS, G-BIAS, and B-BIAS.

The OSM System control menu allows you to set a various conditions of the

monitor.

NOTE: This control is available only when No. 8 pin of the DIP switch is set at

the ON position. The DIP switch is located on the back cabinet.

OSM keys on the remote control unit function as follows:

: highlights one of the control items in the System

control menus.

: proceeds to the selected menu choice.

: exits the current control and returns to its original

System control menus.

: exits the OSM controls.