Runco CW-42i 사용자 설명서

OSD (On Screen Display) Controls

» PICTURE ADJUST Menu

Adjusting the picture

The contrast, brightness, sharpness, color and tint can be adjusted as desired.
Example: Adjusting the contrast
Press the MENU button on the remote control to display the MAIN MENU on the screen, then...
1. Use the and buttons to select “PICTURE ADJUST”, then press the MENU button.

The “PICTURE ADJUST” screen appears.

2. Use the and buttons to select “CONTRAST”.

3. Use the and buttons to adjust the contrast.

* If neither or buttons is pressed within 5 seconds, the current setting is set and the previous screen

reappears.

4. Once the adjustment is completed...

Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more.

NOTE:

If “CAN NOT ADJUST” appears...

When trying to enter the PICTURE submenu, make sure PICTURE MEM is not set to FACTORY.

CONTRAST

BRIGHTNESS

SHARPNESS

COLOR

TINT

PICTURE MEM : NORMAL
VIDEO NR

: OFF

PICTURE ADJUST

1 / 2

SEL. ADJ. RETURN

EXIT

CONTRAST

Information

■ Picture adjustment screen

CONTRAST .........

Changes the picture’s white level.

BRIGHTNESS .....

Changes the picture’s black level.

SHARPNESS .......

Changes the picture’s sharpness.

Adjusts picture detail of VIDEO

display.

COLOR ...............

Changes the color density.

TINT ....................

Changes the picture’s tint. Adjust for

natural colored skin, background, etc.

■ Adjusting the computer image

Only the contrast and brightness can be adjusted when a computer

signal is connected.

■ Restoring the factory default settings

Select “FACTORY” under the “PICTURE MEM” settings.