Runco CW-42i 사용자 설명서
DISP. MODE
Select the screen mode from between two options
(Splitting, Blanking).
Example: Setting “BLANK”
Perform Steps 1-2 of VIDEO WALL, then...
3. Use the and buttons to select “DISP. MODE”.
4. Use the and buttons to select “BLANK”.
The mode switches as follows each time the or button is pressed: SPLIT BLANK
AUTO ID
This feature automatically sets the ID numbers of multiple displays connected to each other.
Example: Setting “ON”
Set the ID number for the No. 1 display on ID NUMBER menu.
Perform Steps 1-2 of VIDEO WALL, then...
3. Use the and buttons to select “AUTO ID”.
4. Use the and buttons to select “ON”, then press the MENU button.
The mode switches as follows each time the or button is pressed: OFF ON
54
OSD (On Screen Display) Controls
DIVIDER : OFF
POSITION
POSITION
DISP. MODE
: SPLIT
AUTO ID
IMAGE OPT
P. ON DELAY
: OFF
LUM SET LINK : OFF
REPEAT TIME
REPEAT TIME
: OFF
VIDEO WALL
SEL. ADJ. RETURN
EXIT
Information
■ DISP. MODE SETTINGS
■ DISP. MODE SETTINGS
SPLIT .......... Combines enlarged screens and creates
multiple
screens.
BLANK ....... Corrects misalignment of combined screen
portions and creates multiple screens.
Information
■ AUTO ID settings
ON ...... Enables Audo ID function. In the case shown below, display 1
will be set as ID 1, display 2 as ID 2, etc.
OFF ..... Disables Auto ID function.
No. 1 No. 2
No. 4 No. 3
No. 1 No. 2
No. 4 No. 3
No. 1 No. 2
No. 4 No. 3
No. 1 No. 2
No. 4 No. 3
Display 1
Display 2
Display 4
Display 3
REMOTE
IN
REMOTE
OUT
REMOTE
OUT
OUT
REMOTE
IN
REMOTE
OUT
REMOTE
IN
IN
REMOTE
OUT
OUT
REMOTE
IN
IN
AUTO ID
ADJ. EXIT
EXIT
AUTO ID
: ON
1
3
2
4
1
2
3
8
9
4
7
6
5
WIRED CABLE
CONNECTION TURN
CONNECTION TURN