Marshall electronic M-LYNX-10W 사용자 설명서
Lynx
LCD Monitor User Manual
Lynx
LCD Monitor User Manual
7
Battery Installation
• Press down the card bolt and pull out the battery card
• Place battery in card with anode (+) side upward
• Place battery card back in original place
Back of remote controller
Battery Slot
Battery
Battery
Card bolt
M-Lynx-10W Specifications
Type:
TFT LCD Digital Panel
Screen size:
10-inch
Definition:
1024 (h) x RGB x 600 (v)
Computer Resolution:
800 x 600 or 1024 x 768 (60Hz)
System:
NTSC/PAL
Nominal Voltage:
12V
Power Consumption:
5W MAX
Control:
Front panel button/Remote control
Operating Environment: -10ºC - +60ºC
Dimensions:
9.7” x 6.5” x .75”
6
1. Power
2. AV1/AV2/VGA
3. Function Decrease
4. Reset
5. Function Increase
6. Menu (Up/Down/Left/Right)
2. AV1/AV2/VGA
3. Function Decrease
4. Reset
5. Function Increase
6. Menu (Up/Down/Left/Right)
MENU
VIDEO
SELECT
MODE
SELECT
LCD REMOTE
1
2
3
6
5
4
REMOTE CONTROL OPERATIONS
BATTERY REPLACEMENT
Under normal operating conditions, the battery will have a 1-year life (shorter,
depending on the conditions). Low battery power can result in a narrower working
range, so always make sure your remote has fresh batteries.
depending on the conditions). Low battery power can result in a narrower working
range, so always make sure your remote has fresh batteries.
Lithium Batteries
Always keep the battery out of the reach of children. Clean the batteries with a dry
cloth to ensure best performance. When installing the batteries, make sure that
the polarity is correct. Do not use a metal clamp to remove or clip the battery as a
short circuit could result.
cloth to ensure best performance. When installing the batteries, make sure that
the polarity is correct. Do not use a metal clamp to remove or clip the battery as a
short circuit could result.
Note: The battery can explode if improperly handled. Do not throw battery in trash
or fire. Always recycle battery properly.
or fire. Always recycle battery properly.