Marantz PD4292D 사용자 설명서
19
Battery Installation and Replacement
Insert the 4 "AA" batteries, making sure to set them in
with the proper polarity.
with the proper polarity.
1. Press and pull.
2. Load the batteries in the direction indicated by the "+"
and "–" marks in the case.
Operating Range
* Use the LCD remote controller within a distance of about
7 meters from the front of the monitor's remote control
sensor and at a horizontal angle of within 30
sensor and at a horizontal angle of within 30
°
.
* The remote control operation may not function if the
monitor's remote control sensor is exposed to direct sun-
light or strong artificial light, or if there is an obstacle
between the sensor and the remote control unit.
light or strong artificial light, or if there is an obstacle
between the sensor and the remote control unit.
POWER/STANDBY
INPUT SELECT
POWER
30˚
30˚
Approx.
7m/ 23ft
7m/ 23ft
3. Put the lid back on.
LCD Remote Controller Notes
* Keep the back light button turned off except when using
the LCD remote controller in a dark room. Leaving the
back light on wears down the batteries faster.
back light on wears down the batteries faster.
Handling the LCD remote controller
* Do not subject to strong shocks.
* Do not subject to moisture.
* Do not subject to moisture.
If moisture gets on the unit, wipe it off immediately.
* Keep away from heat.
* Do not scratch or tap on the LCD remote controller's
* Do not scratch or tap on the LCD remote controller's
liquid crystal display with sharp objects (pens, com-
passes, etc.), and do not subject it to strong shocks.
passes, etc.), and do not subject it to strong shocks.
LCD remote controller
PD4292D-2
00.10.4, 3:10 PM
19