Samsung Q1 사용자 설명서

Setting a Booting Password   104

On the screen, the password setting buttons are described.

You can set a password by entering numbers between 1 and 4 with the Joystick.

Since the u2 button is used as Delete (BackSpace) and the u4 button is used as Cancel (Esc), 
enter the password using the Joystick.

Enter a password, press <Enter>, re-enter the password for confirmation, and press <Enter> 
again.

When a message confirming the password configuration appears in the [Setup Notice] win-
dow, press <Enter>.

The supervisor password has been set. The supervisor password is required to turn the com-
puter on or to enter System Setup.

Users can start the system with their user password, but cannot enter the System Setup.

Before configuring a user password, a supervisor password must have been configured. Deactivating 
the supervisor password also deactivates the user password.

However, please note that deactivating a user password does not deactivate the supervisor pass-
word.

In the Set User Password item, press <Enter> and complete the procedures of Step 3 of Setting 
a Supervisor Password.

Before activating the booting password, a supervisor password must have been configured.

Set the Password on boot option to Enabled. From now on, system booting will not proceed with-
out the password.

Up: 1

Right: 2

Next: 3

Left: 4