Barco 10MP 사용자 설명서
Coronis Fusion 10MP
29
Keys indicator lights
A
BOUT
THE
KEYS
INDICATOR
LIGHTS
By default, after lighting up, the keys indicator lights will dim again if no
further actions are taken within the following 5 seconds. However, this
behavior can be changed so that the keys indicator lights are always on
or always off.
further actions are taken within the following 5 seconds. However, this
behavior can be changed so that the keys indicator lights are always on
or always off.
T
O
CONFIGURE
THE
KEYS
INDICATOR
LIGHTS
:
1
Bring up the OSD main menu.
2
Navigate to the Configuration > User Interface > Indicator Lights
menu.
menu.
3
Enter the Keys submenu.
4
Select Automatic/Always On/Always Off as desired and confirm.
Power lock function
A
BOUT
THE
POWER
LOCK
FUNCTION
By enabling the power lock function, the C
ORONIS
F
USION
10MP display is
forced to remain switched on. This means that it can’t be switched to
stand-by mode until the power lock function is disabled again.
stand-by mode until the power lock function is disabled again.
T
O
ENABLE
/
DISABLE
THE
POWER
LOCK
FUNCTION
:
1
Bring up the OSD main menu.
2
Navigate to the Configuration > User Interface > Controls menu.
3
Enter the Power Lock submenu.
4
Select Enabled/Disabled as desired and confirm.