Avocent 280ES 사용자 설명서

 

 

Appendices 

STATUS SYMBOLS
No       or       shows next to server number or name
 

Check for loose keyboard cable connection between server and switch.

 

Disconnect and reconnect the keyboard cable at the same port number on the switch.

 

Restart OSCAR: Press Escape or click X in Main dialog box to exit OSCAR. 

Then press Print Screen.

       shows next to cascaded port 
 

Disconnect and reconnect the keyboard cable at the same port number on the switch.

 

Replace keyboard cable.

       shows next to server number or name when      is expected
 

PS/2 interconnecting cable from another switch is connected in error to the port. 

Disconnect the secondary switch and connect the server to the port.

        shows next to primary server when      is expected 
 

Confirm selection of the correct number of ports (4, 8, 10, 16) for the secondary 

switch in the Device Modify dialog box. 

 

Confirm that all port settings are set to Standard if not connected to a 

secondary switch.

SWITCH BEHAVIORS
Switch selects servers at will 
 

Ensure that scanning is off. To turn off scanning, click Main - Commands, then 

clear Enabled.

Same keystrokes or mouse movements display on one or more servers
 

Ensure that broadcasting is turned off. To turn off broadcasting, click Main - 

Commands, then clear Activated.

Can only select Port 1 on a secondary switch (selecting Port 1-4 selects Port 1-1) 
 

Ensure correct settings in the Device Modify dialog box at the primary switch. 

Confirm the selection of the correct number of ports (2, 4, 8, 10, 16) for the 

secondary switch: Main - Setup - Devices - Device Modify.

 

Confirm that all port settings are set to Standard if connected to servers.

Broadcasting unavailable 
 

Ensure that broadcasting is not in use by another user. Request that the other 

user deactivate broadcasting.