NCR 5992 사용자 설명서
3-1
Chapter 3
Installation
The NCR 5992 can be installed by a person who has maintenance
technician skills and is familiar with the host system.
technician skills and is familiar with the host system.
The installer must know where to install the 5992, which host
workstation to use, and which of the workstation's communication
ports to use.
workstation to use, and which of the workstation's communication
ports to use.
Connecting a 5992 to a host (PC, terminal, or workstation) is normally a
simple process. However, some hosts require a trained technician to
remove cabinetry and install the cable(s). Refer to your host
documentation.
simple process. However, some hosts require a trained technician to
remove cabinetry and install the cable(s). Refer to your host
documentation.
The installation process consists of:
•
connecting the required cables to the 5992
•
verifying the operation of the 5992.
Hardware Considerations
5992 Unit Location
Install the 5992 on a stable, level surface such as the top of a table,
checkout counter, or shelf. Position it for convenient access by the
customer and to be in full view of the workstation operator.
checkout counter, or shelf. Position it for convenient access by the
customer and to be in full view of the workstation operator.
Provide cabinet access holes and cable channels for the interface cable
and power module (or power adapter kit), as discussed in this chapter.
and power module (or power adapter kit), as discussed in this chapter.