NCR 5992 사용자 설명서
Chapter 6: Diagnostics Specification
6-33
Calibrate
The calibration diagnostics allow you to re-calibrate the digitizer,
making the digitizer’s coordinates match the LCD’s. Select
CALIBRATE
making the digitizer’s coordinates match the LCD’s. Select
CALIBRATE
from the DIAGNOSTICS menu:
An “Enter Calibration Password” prompt displays. Type in the
password “8467” (“THOR”), and press Enter. If an incorrect password
is entered, a “Password Invalid” message displays. Press any key to
end the session and start the NCR 5992 application. Then access
diagnostics mode again.
password “8467” (“THOR”), and press Enter. If an incorrect password
is entered, a “Password Invalid” message displays. Press any key to
end the session and start the NCR 5992 application. Then access
diagnostics mode again.
Entering the correct password will prompt the following display:
Calibrate Mode
0=Stylus, 1=Touch,
2=Both
0=Stylus, 1=Touch,
2=Both
Depending on the option selected the following screen(s) will display:
Stylus
+
Touch the cross with
the stylus
the stylus
Touch
+