Nexstar HX 사용자 설명서

Installation 

 

 

( figure 5.1-E )

( figure 5.1-E )

Connect the type (B) USB connector to the 
NexStar and the type (A) USB connector 
to an available USB port on your system. 
Connect the power cable to the NexStar 
and plug the cable into an available
outlet.
Turn on the NexStar via the power switch. 

Your operating system should detect the 
NexStar and automatically install the 
necessary drivers. Once your operating 
system finishes setting up the NexStar , it will 
mount your hard drive. On Mac OS systems, the 
new volume should appear on desktop. On a 
Windows PC, the new volume will appear 
under My Computer.
Your NexStar External Hard Drive is now 
ready for use.

(1)

(2)

(3)

(4)

(5)

(1)

(2)

(3)

(4)

(5)

If you can see the USB icon in the system tray , 

but there is no any disk appear in your computer, 

please confirm your hard disk  is partitioned.

NOTE : 

For new hard drives, you will need to initialize and 
partition your hard drive before it will appear in 
Windows Explorer or on your Mac desktop. Please 
refer to your hard drive manufacturer's documen-
tation or read the"Creating a New Partition" section 
of this manual.

Connect the eSATA to the NexStar and to an 

available eSATA port on your system.

Connect the power cable to the NexStar 

and plug the cable into an available  

outlet. ( figure 5.1-E )

Turn on the NexStar via the power switch. 

( figure 5.1-E )

Your operating system should detect the 

NexStar and automatically install the 

necessary drivers. Once your operating 

system finishes setting up the NexStar, 

it will mount your hard drive. On 

Mac OS systems, the new volume should 

appear on desktop. On a Windows PC, the new 

volume will appear under My Computer.

Your NexStar External Hard Drive is 

now ready for use.

NOTE : 

(7)

eSATA Cable

or

Pow

er

(6)

(8)

( figure 5.1-E )