LaCie 301910 사용자 설명서
LaCie Slim DVD±RW •
D
esign
by
s
am
H
ecHt
Troubleshooting
User Manual
page 18
5.1. Mac Users
Problem
Question
Solution
The drive is not recognized
by the computer.
by the computer.
Does your computer’s configuration
meet the minimum system require-
ments for use with this drive?
meet the minimum system require-
ments for use with this drive?
See section
.
Is the drive receiving enough power
through your computer’s USB bus?
through your computer’s USB bus?
The Slim DVD±RW may not be receiving sufficient power through
your computer’s USB bus. Please try attaching the additional USB
2.0 A connector (see
your computer’s USB bus. Please try attaching the additional USB
2.0 A connector (see
) or an
optional external power supply (not included).
Did you follow the correct installation
steps?
steps?
Review the installation steps in
Is there an icon on your desktop?
Look for an icon on your desktop that represents disc you have
inserted. If the disc does not appear, follow the rest of the Trouble-
shooting tips to isolate the problem.
inserted. If the disc does not appear, follow the rest of the Trouble-
shooting tips to isolate the problem.
Are both ends of the USB cable
securely attached?
securely attached?
✦
Disconnect the USB cable, wait 10 seconds and then recon-
nect.
nect.
✦
Ensure that USB connectors are properly aligned. USB cables
can only be inserted one way. Make sure that they are cor-
rectly oriented.
can only be inserted one way. Make sure that they are cor-
rectly oriented.
✦
Check that the USB connectors are straight and fully seated
in the USB ports.
in the USB ports.
✦
Only use certified USB cables, such as the cables provided
with your LaCie drive.
with your LaCie drive.
If you have followed all of these steps and the drive is still not
recognized, shut down your computer, wait 3 to 5 minutes, restart
your computer and try again.
recognized, shut down your computer, wait 3 to 5 minutes, restart
your computer and try again.
Is there a conflict with other device
drivers or extensions?
drivers or extensions?
Did you attach the primary USB 2.0
A plug?
A plug?
The USB 2.0 Y cable that is shipped with the device has two USB
2.0 A plugs: the primary (without the lightning bolt sticker) and
the secondary (with the lightning bolt sticker). For most computers,
attaching the primary plug will allow for sufficient power and carry
the data signal. The secondary plug does not carry a data signal as
it is only meant to provide additional power when necessary.
2.0 A plugs: the primary (without the lightning bolt sticker) and
the secondary (with the lightning bolt sticker). For most computers,
attaching the primary plug will allow for sufficient power and carry
the data signal. The secondary plug does not carry a data signal as
it is only meant to provide additional power when necessary.