Seagate ST9200011FS 사용자 설명서
![Seagate](https://files.manualsbrain.com/attachments/b8a65e13882738a617b4fb1dec35c49349976167/common/fit/150/50/2b4b03599a6f710d30699589ed58ececb8b6db2f0c51d2afc623a22705ee/brand_logo.png)
12
Pulsar Product Manual, Rev. A
2.8.1.1
Typical current profiles
Figure 1. Typical 5V startup and operation current profile
2.8.2
Conducted noise
Input noise ripple is measured at the host system power supply across an equivalent 15-ohm resistive load on
the +5 volt line.
the +5 volt line.
• Using 5-volt power, the drive is expected to operate with a maximum of
250 mV peak-to-peak sine-wave
injected noise at a frequency from 100Hz up to 20 MHz.
Note. Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write
current.
2.8.3
Voltage tolerance
Voltage tolerance (including noise):
5V ±5%