Seagate ST760211DE 사용자 설명서
Lyrion Series IDE Product Manual, Rev. E
29
4.2.2
Set Features command
This command is used by the host to establish parameters that affect the execution of certain drive features.
The supported features determined by the value in the Features register are as shown in Table 11. Read look-
ahead and write cache are enabled by default upon power on.
Table 10:
The supported features determined by the value in the Features register are as shown in Table 11. Read look-
ahead and write cache are enabled by default upon power on.
Table 10:
Features register values
Feature Description
02h Enable
Write
Cache
03h
Set DMA and PIO transfer modes based on the value in the Sector Count register.
Sector Count register values
08h: Set PIO Transfer Mode 0
09h: Set PIO Transfer Mode 1
0Ah: Set PIO Transfer Mode 2
0Bh: Set PIO Transfer Mode 3
0Ch: Set PIO Transfer Mode 4
20h: Set Multiword Transfer Mode 0.
21h: Set Multiword Transfer Mode 1.
22h: Set Multiword Transfer Mode 2.
40h: Set Ultra DMA mode 0.
41h: Set Ultra DMA mode 1.
42h: Set Ultra DMA mode 2.
44h: Set Ultra DMA mode 4.
05h
Enable Advanced Power Management (APM) with APM level as in the Sector Count register .
Sector Count register values
0h : Reserved
1h – 7Fh : Allow Spin-Down (Standby Mode)
80h – FEh : Disallow Spin-Down (Low Power Idle Mode)
FFh : Reserved
55h
Disable Read Look-Ahead.
82h Disable
Write
Cache.
85h
Disable Advanced Power Management (APM)
AAh
Enable Read Look-Ahead .