Seagate ST3600057FC 사용자 설명서
Cheetah 15K.7 FC Product Manual, Rev. A
23
6.2.1
Conducted noise immunity
Noise is specified as a periodic and random distribution of frequencies covering a band from DC to 10 MHz.
Maximum allowed noise values given below are peak-to-peak measurements and apply at the drive power
connector.
Maximum allowed noise values given below are peak-to-peak measurements and apply at the drive power
connector.
6.2.2
Power sequencing
The drive does not require power sequencing. The drive protects against inadvertent writing during power-up
and down.
and down.
6.2.3
Current profiles
The +12V and +5V current profiles are shown in the following figures.
Note: All times and currents are typical. See Section 6.2 for maximum current requirements.
Figure 1. Typical ST3600057FC current profiles
+5 V = 250 mV pp from 0 to 100 kHz to 20 MHz.
+12 V = 800 mV pp from 100 Hz to 8 KHz.
+12 V = 800 mV pp from 100 Hz to 8 KHz.
450 mV pp from 8 KHz to 20 KHz.
250 mV pp from 20 KHz to 5 MHz.
250 mV pp from 20 KHz to 5 MHz.