StarTech.com SV441DUSBI 사용자 설명서
Instruction Manual
25
Compatibility
The
Compatibility menu offers
features that may provide en-
hanced functionality with certain
KVM and power products, such
as StarTech.com’s Remote Power
Switch (PCM8155HNA). These
can be left at their default values if you are not connecting the unit to a
KVM or power management device.
hanced functionality with certain
KVM and power products, such
as StarTech.com’s Remote Power
Switch (PCM8155HNA). These
can be left at their default values if you are not connecting the unit to a
KVM or power management device.
SNMP
The
SNMP menu allows you to configure the SV441DUS-
BI so it can be recognized and managed using industry
standard Simple Network Management Protocol software.
standard Simple Network Management Protocol software.
RADIUS
The RADIUS server requires the IP address, the UDP
port number (1812 - default or 1645)
and the shared secret. The shared
secret is used to encrypt com-
munications and corresponds to a
shared password for the RADIUS
server and the client machine. Two
additional servers may be defined
for backup purposes. Each server
will be tried in order using the
indicated number of retries and
timeout period, which are configu-
rable on the same page.
Remember to enable RADIUS after configuring it. While RADIUS authen-
tication is enabled, the locally defined accounts on the Server Remote
Control unit will not be used, except for the SSH login. However, if a user
name in the form “name.local” is given at the RADIUS prompt, the system
port number (1812 - default or 1645)
and the shared secret. The shared
secret is used to encrypt com-
munications and corresponds to a
shared password for the RADIUS
server and the client machine. Two
additional servers may be defined
for backup purposes. Each server
will be tried in order using the
indicated number of retries and
timeout period, which are configu-
rable on the same page.
Remember to enable RADIUS after configuring it. While RADIUS authen-
tication is enabled, the locally defined accounts on the Server Remote
Control unit will not be used, except for the SSH login. However, if a user
name in the form “name.local” is given at the RADIUS prompt, the system