Fujitsu DX8100 S2 사용자 설명서
Chapter 11 System Management
11.2 Functions in the Action Area for System
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED
P2X0-1090-10ENZ0
914
11.2.11.3 Delete Storage Migration Path
This function deletes path groups for Storage Migration.
The procedure to delete the Storage Migration path is as follows:
Procedure
1
Select the path group that is to be deleted (multiple selections can be made) and click
[Delete Path] in [Action].
[Delete Path] in [Action].
→ A confirmation screen appears.
2
Click the [OK] button.
→ Deletion of the Storage Migration path starts.
3
Click the [Done] button to return to the [Storage Migration] screen.
End of procedure
The path groups must be deleted after the data migration is complete. The following operations are not
available before path groups are deleted:
available before path groups are deleted:
•
Concurrent upgrade of firmware at the destination storage system
•
ECO mode schedule setting of the RAID group to which the destination volume belongs
•
ECO mode schedule setting of the Thin Provisioning Pool (TPP) to which the destination volume belongs
•
Capacity expansion of the RAID group to which the destination volume belongs
•
RAID migration of the destination volume
•
Encryption of the destination volume
•
Capacity expansion of the destination volume
•
Deletion of the destination volume
•
Port mode modification of the destination FC-Initiator port
•
Port parameter setting of the destination FC-Initiator port
•
Reduction of the CA to which the destination FC-Initiator port belongs
The path group can be deleted if all configured paths are in any of the following state:
•
"Source LUN Status" of the Storage Migration Volume List is "
Not Exist".
•
"Migration Status" of the Storage Migration is "Normal End", "Stop", "Initial", or "Waiting".