Toshiba SD-R1202 사용자 설명서

Congratulations on your purchase of a Toshiba  CD-RW/DVD-ROM  drive and Kit.
The following information will help you in the simple installation of your new
CD-RW/DVD-ROM drive.

Please unpack your CD-RW/DVD-ROM kit, and assure that you have the follow-
ing items:
! Toshiba CD-RW/DVD-ROM Drive
! CD-R Blank Media CD
! CD-RW Blank Media CD
! CyberLink PowerDVD

™

 Software CD

! VOB InstantCD/DVD Software CD
! CD-RW/DVD-ROM Installation Instructions (this manual)
! Quick Start Guide
! Mounting screws 

(4)

! IDE BUS cable
! DVD/CD audio cable

Additional items you may need that are not included in the kit are:
! Phillips Screwdriver
! Mounting hardware (i.e. some computer systems use mounting rails).

The CD-RW/DVD-ROM kit requires the following:
✔ At least 55MB of free hard disk space
✔ At least 32MB of RAM
✔ *Pentium II processor at 266MHz or higher or....

*Celeron 300A processor or higher or....
*K6-2 processor at 300MHz or higher

✔ Display card supporting DirectDraw
✔ 16-bit or better sound card
✔ Microsoft

™

 Windows 95 or higher

✔ Amplified stereo speakers

* These requirements are only required if you are using the CyberLink PowerDVD

™

software for movie playback.  Toshiba’s  CD-RW/DVD-ROM drive will work as
a CD-ROM, DVD-ROM and CD-RW when using a lower speed Pentium system.

1