Western Digital WD ShareSpace 사용자 설명서
EXTERNAL USB DRIVE SHARING & BACKUP - 62
WD SHARESPACE
USER MANUAL
2. Connect a USB drive to the USB port (Port 1) located on the front panel of the
WD ShareSpace, and wait for the USB backup LED
to turn off (about 2
seconds).
3. Press and hold the USB backup button until the USB backup LED on the front of
the unit begins to flash (about 3 seconds). The USB LED will flash twice per
second while the backup is in progress and will light steadily when the backup is
complete.
second while the backup is in progress and will light steadily when the backup is
complete.
The system will back up data from the pre-selected source share folder on the
WD ShareSpace to the USB drive first partition.
WD ShareSpace to the USB drive first partition.
Note: If the USB drive does not have enough free space to back up the selected portion of the WD
ShareSpace, an error will display when the USB drive is full. The error will appear as a flashing red
LED on the front of the ShareSpace, as well as a text message at the top of the WD ShareSpace’s
Network Storage Manager web page.
ShareSpace, an error will display when the USB drive is full. The error will appear as a flashing red
LED on the front of the ShareSpace, as well as a text message at the top of the WD ShareSpace’s
Network Storage Manager web page.