Addonics Technologies SCCHDIU64 사용자 설명서
Addonics Technologies
Saturn Cipher Combo Hard Drive User Guide
12
Chapter 8
Drive Cradle installation and using the Saturn
Combo Hard Drive
Combo Hard Drive
Insert the IDE drive cradle into a standard 5 ¼” drive bay of a computer
and secure the drive cradle to the drive bay with 4 screws (already
included with the drive cradle), 2 on each side of the drive bay.
Be sure the Saturn cipher key is inserted into the drive enclosure prior to
turning on the power of the drive cradle. Hard drive will not be detected by
the computer if the power to the drive cradle is turned on without the Cipher
key. Under such condition, the system has to be restarted with the Cipher key
already inserted into the drive enclosure in order to detect the hard drive.
The key lock of the drive cradle must be in the lock position in order to get
power to the hard drive. This also locks the drive enclosure inside the drive
cradle.
Once the drive is detected by the system OS, the Saturn Cipher key may be
removed from the drive enclosure. The Saturn Cipher hard drive will
continue operating normally till it is removed from the system or powered off.
turning on the power of the drive cradle. Hard drive will not be detected by
the computer if the power to the drive cradle is turned on without the Cipher
key. Under such condition, the system has to be restarted with the Cipher key
already inserted into the drive enclosure in order to detect the hard drive.
The key lock of the drive cradle must be in the lock position in order to get
power to the hard drive. This also locks the drive enclosure inside the drive
cradle.
Once the drive is detected by the system OS, the Saturn Cipher key may be
removed from the drive enclosure. The Saturn Cipher hard drive will
continue operating normally till it is removed from the system or powered off.