Emerson PMPPC7448 사용자 설명서

 DMC Setup

PmPPC7448 User’s Manual

You need the following items to set up and check the operation of the Emerson DMC.

❐ A compatible PPMC board, such as the Emerson PmPPC7448
❐ Card cage and power supply
❐ CRT terminal 
When you unpack the board, save the antistatic bag and box for future shipping or storage.

Caution:

Do not install the board in a rack or remove the board from a rack while power is applied, at 
risk of damage to the board.

Use the following procedure to attach the DMC to the PmPPC7448 
(see 

 for DMC location):

1

Remove the protective vinyl caps from the screws.

2

Line up the screws with the threaded holes on the bezel from the bottom side of the 
PmPPC7448. 

3

Snap the connectors (P1) together and secure the mounting screws through the standoffs 
on the DMC to the PmPPC7448.