AMCC 9500S 사용자 설명서

Controller Object Commands

51

3

Use  the  /cx add rebuild command to create the rebuild schedule slots you 
want (described above.)

4

Use the /cx set rebuild=enable command to enable the schedule (this 
enables all rebuild schedule slots). (For details, see page 53.)

                                      

/c

x

 add verify=

ddd:hh:duration

This command adds a new background verify task to be executed on the day 
ddd (where ddd is Sun, Mon, Tue, Wed, Thu, Fri, and Sat), at hour hh 
(range 0 .. 23), for a duration of duration (range 1 .. 24) hours. A maximum of 
seven verify tasks can be scheduled. This command will fail if no (empty) 
task slot is available. 

 //localhost> /c1 add verify=Sun:16:3

adds a verify background task schedule to be executed on Sundays at  16 
hours (4:00 PM) for a duration of 3 hours.

Setting up a verify schedule requires several steps, and several different CLI 
commands in addition to /cx add verify.

1

Use the /cx show verify command to display the current schedule for 
verify tasks. (For details, see page 48.)

2

If any of the scheduled tasks do not match your desired schedule, use
the /cx del verify command to remove them. (For details, see page 53.)

3

Use the /cx add verify command to create the verify schedule slots you 
want (described above.)

4

Use  the /cx set verify=enable command to enable the schedule (this 
enables all rebuild schedule slots). (For details, see page 54.)

5

Use  the /cx/ux set autoverify=on command to turn on autoverify for each 
unit you want to follow the schedule. (For details, see page 68.)

 If all time slots are removed, be sure to also disable the schedule. 

Otherwise the applicable background task will never occur.