Fujitsu 4312 FA 사용자 설명서

다운로드
페이지 29
Colour monitor 4312 FA
S26361-K841-V150-1-5E19
English - 19
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications interface
between the monitor and the PC. If your computer is equipped with a VESA-DDC-compatible VGA
interface, it can automatically read the data for ensuring optimum operation from your monitor and
select the appropriate settings.
i
If the monitor 4312 FA is not yet displayed in the list of monitors, you can select the
following monitor instead:
Siemens or Siemens Nixdorf 4311 FA, 4611 FA 4612 FA or 461 V
Preset operating modes
i
The picture position and size have been set to optimum values at the factory for the
operating modes listed above. Depending on the screen controller used, it may be
necessary to adjust the display position and size. In this case, you can change and save
the settings (see "
Horizontal frequency
Refresh rate
Screen resolution
31,47 kHz
31,47 kHz
31,47 kHz
37,50 kHz
37,88 kHz
46,87 kHz
48,36 kHz
60,02 kHz
60,00 kHz
79,98 kHz
70.00 Hz
70.00 Hz
60.00 Hz
75.00 Hz
60.30 Hz
75.00 Hz
60.00 Hz
75.00 Hz
60.00 Hz
75.00 Hz
640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
For ergonomic reasons, a screen resolution of 1024 x 768 pixels is recommended. Because of the
technology used (active matrix) an LCD monitor provides a totally flicker-free picture even with a
refresh rate of 60 Hz.
i
Because of the technology used (active matrix) an LCD monitor provides a totally flicker-
free picture even with a refresh rate of 60 Hz.
Power supply plug
0 V
+ 14 V DC