Nortel Networks 311 사용자 설명서
746
NT8D15 E and M Trunk card
•
decode received messages to set configuration and activate/deactivate
interface relays for PCM loopback diagnostic purposes
interface relays for PCM loopback diagnostic purposes
•
decode outpulsing messages (one per digit) from the CPU to drive
outpulsing relays at 20 pps, 10 pps1 (primary), or 10 pps2 (secondary)
outpulsing relays at 20 pps, 10 pps1 (primary), or 10 pps2 (secondary)
•
monitor signals from the trunk interface and generate a message when
required for each state change
required for each state change
•
control disabling and enabling of unit or card
•
control A-Law and Mu-Law operation modes
•
control transmission pad settings
The signaling and control portion of the trunk card works with the CPU to
operate the card hardware. The card receives messages from the CPU over
a signaling channel in the DS30X loop and returns status information to the
CPU over the same channel. The signaling and control portion of the card
provides the means for analog loop terminations to establish, supervise and
take down call connections.
operate the card hardware. The card receives messages from the CPU over
a signaling channel in the DS30X loop and returns status information to the
CPU over the same channel. The signaling and control portion of the card
provides the means for analog loop terminations to establish, supervise and
take down call connections.
The signaling and control operation of the card performs many functions
which are handled by different functional units. Some of the functions of the
signaling and control portion of the E & M card are:
which are handled by different functional units. Some of the functions of the
signaling and control portion of the E & M card are:
•
Communications between the card and the CPU
•
Monitor signals from the trunk interface and generate a message when
required for each state change
required for each state change
•
Decode received messages and activate/deactivate configuration and
interface relays PCM loopback for diagnostic purposes
interface relays PCM loopback for diagnostic purposes
•
Disable and enable units for maintenance
•
Drive Light Emitting Diode (LED) on faceplate
•
Decode outpulsing messages (one per digit) from the CPU to drive
outpulsing relays
outpulsing relays
— Make break ratios (20pps, 10pp1, 10pps2) are downloaded by
software.
•
Control of A/mu-law operation
Maintenance features
The following features are provided for maintenance of the E and M trunk:
•
indication of card status from self-test
•
software enable and disable capability for individual units or entire card
•
loopback of PCM signals to DS-30X for diagnostic purposes
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311
01.04
Standard
Release 5.0
23 May 2008
Copyright © 2003-2008, Nortel Networks
.