Nvidia 5500 사용자 설명서
NVIDIA Corporation
66
Quadro FX 4500/5500 SDI User’s Guide– Version 2.0
C
HAPTER
5
API Control
Linux CONTROL X Extension API
This section describes the NvGvo APIs inthe following sections:
•
•
•
Using the NV-CTRL X APIs
The NV_CTRL_GVO* integer attributes are used to configure GVO (graphics to video
out) functionality on the Quadro FX 4500 SDI graphics board.
out) functionality on the Quadro FX 4500 SDI graphics board.
The following is a typical usage pattern for the GVO attributes:
•
Query
to determine if the X screen supports GV0.
•
Specify
FRAMELOCK).
If you specify GENLOCK or FRAMELOCK, you should also specify
.
•
NV_CTRL_GVO_SDI_SYNC_INPUT_DETECTED to detect what input syncs are
present.
present.
If no analog sync is detected but it is known that a valid bi-level or tri-level sync is
connected, set
connected, set
appropriately and retest with
•
If syncing to input sync, query the
attribute.
The input video format can only be queried after SYNC_SOURCE is specified.
•
Specify the
•
Specify the
.
•
Specify any custom Color Space Conversion (CSC) matrix, offset, and scale with
•
If using the GLX_NV_video_out extension to display one or more pbuffers, call
glXGetVideoDeviceNV() to lock the GVO output for use by the GLX client, then
bind the pbuffer(s) to the GVO output with glXBindVideoImageNV() and send
pbuffers to the GVO output with glXSendPbufferToVideoNV().
glXGetVideoDeviceNV() to lock the GVO output for use by the GLX client, then
bind the pbuffer(s) to the GVO output with glXBindVideoImageNV() and send
pbuffers to the GVO output with glXSendPbufferToVideoNV().
See the GLX_NV_video_out spec for more details.