NEC 5800/320MA 사용자 설명서
Configuring Ethernet PCI Adapters
2-32
Express5800/320Ma: PCI Adapter Guide
5. If necessary, reset the Ethernet address of the team. See
6. If you have not already done so, connect the new Ethernet PCI adapters to the
network.
7. Verify the configuration of the team. See
Updating a Team’s Ethernet Address
When you replace a primary PCI adapter, you must assign the correct Ethernet
address to the team before you connect the new primary adapter to the network.
address to the team before you connect the new primary adapter to the network.
Typically, the Ethernet address of a team is the permanent MAC address of the primary
adapter. When you replace a primary adapter, the team by default continues to use the
MAC address of the adapter you removed. Therefore, after you replace an adapter, you
must assign the team an Ethernet address that matches the permanent MAC address
of one of the Ethernet PCI adapters currently in the system.
adapter. When you replace a primary adapter, the team by default continues to use the
MAC address of the adapter you removed. Therefore, after you replace an adapter, you
must assign the team an Ethernet address that matches the permanent MAC address
of one of the Ethernet PCI adapters currently in the system.
C A U T I O N
!
The network connection is disrupted when you update a
team’s Ethernet address.
team’s Ethernet address.
If necessary, verify that the team’s current Ethernet address is identical to the
permanent Ethernet address of one of the team members.
permanent Ethernet address of one of the team members.
To verify the Ethernet address for a team
1. Start the PROSet utility if you have not already done so (see
).
2. To obtain the current Ethernet address of a team, click the appropriate team in the
left pane of the Intel(R) PROSet for Wired Connections dialog box, then click the
Team Configuration tab. Note the value of Ethernet Address under Team
Information (
Team Configuration tab. Note the value of Ethernet Address under Team
Information (