Motorola HC12 사용자 설명서
User’s Manual
MCUez HC12 Assembler
302
Assembler Messages
MOTOROLA
Assembler Messages
12.3.64 A12401: Value Out of Range –128...127
Type:
Error
Description:
The offset between the current PC and the label specified as the
PC relative address is not in the range of a signed byte (smaller
than –128 or bigger than 127). An 8-bit signed PC relative
offset is expected in the following instructions:
PC relative address is not in the range of a signed byte (smaller
than –128 or bigger than 127). An 8-bit signed PC relative
offset is expected in the following instructions:
• Branch instructions:
BCC, BCS, BEQ, BGE, BGT, BHI, BHS, BLE, BLO, BLS,
BLT, BMI, BNE, BPL, BRA, BRN, BSR, BVC, BVS.
BLT, BMI, BNE, BPL, BRA, BRN, BSR, BVC, BVS.
• Third operand in BRCLR and BRSET instructions
Example for branch instruction:
DataSec: SECTION
var1: DS.W 1
var2: DS.W 2
CodeSec: SECTION
…
LDD var1
BNE label
dummyBl: DCB.B 200, $A7
label STD var2
Tip:
If one of the branch instructions has been used, use the
corresponding long-branch instruction.
corresponding long-branch instruction.
Example:
DataSec: SECTION
var1: DS.W 1
var2: DS.W 2
CodeSec: SECTION
…
LDD var1
LBNE label
dummyBl: DCB.B 200, $A7
label STD var2