Motorola PrPMC800/800ET Processor PMC Module 사용자 설명서
A
PrPMC800/800ET Processor PMC Module Installation and Use (PrPMC800A/IH5)
57
A
Specifications
Specifications
This appendix provides general specifications, including mechanical, electrical and thermal
specifications, for the PrPMC800/800ET.
specifications, for the PrPMC800/800ET.
Mechanical Characteristics
The mechanical outline of the PrPMC800/800ET module conforms to the dimensions defined
by a single wide, standard length PMC module (74mm x 149mm x 10mm stacking height). The
side 2 component height of the PrPMC800/800ET conforms to the standard side 2 height
dimension (3.5mm).
by a single wide, standard length PMC module (74mm x 149mm x 10mm stacking height). The
side 2 component height of the PrPMC800/800ET conforms to the standard side 2 height
dimension (3.5mm).
Electrical Characteristics
The PrPMC800/800ET only requires a 3.3V +/- 5% input. The estimated +3.3V current draw
and power for various configurations of the PrPMC800/800ET are shown in the following table.
and power for various configurations of the PrPMC800/800ET are shown in the following table.
Table A-1. Power Requirements for PrPMC800/800ET
Module Configuration
Amps/Watts @ 3.3V
Typical
Maximum
100 MHz Bus with MPC750-Class Processor @ 450
MHz
MHz
3.42A/11.3W
4.00A/13.2W
100 MHz Bus with MPC7410 Processor @ 450 MHz
– Altivec disabled
– Altivec disabled
3.27A/10.8W
3.82A/12.6W
100 MHz Bus with MPC7410 (N) Processor @ 400
MHz – Altivec disabled
MHz – Altivec disabled
2.51A/8.28W
3.08A/10.2W
100 MHz Bus with MPC7410 Processor @ 500 MHz
- Altivec disabled
- Altivec disabled
4.10A/13.5W
4.51A/14.9W