Microsoft G7VP2 사용자 설명서

54

3

Award BIOS Setup Utility

3.1.9  Supervisor Password

If you want to protect your system and setup from unauthorized entry,

set a supervisor’s password with the “System” option selected in the

BIOS Features Setup. If you want to protect access to setup only, but

not your system, set a supervisor’s password with the “Setup” option

selected in the BIOS Features Setup. You will not be prompted for a

password when you cold boot the system.

Use the arrow keys to highlight the “Supervisor Password” option and

press <Enter>. The message below will appear.

Enter Password:

Type in the password. You are limited to eight characters. When done,

the message below will appear:

Confirm Password:

You are asked to verify the password. Type in exactly the same

password. If you type in a wrong password, you will be prompted to

enter the correct password again. To delete or disable the password

function, highlight “Supervisor Password” and press <Enter>, instead of

typing in a new password. Press the <Esc> key to return to the main

menu.

3.1.10  User Password

If you want another user to have access only to your system but not

to setup, set a user’s password with the “System” option selected in

the BIOS Features Setup. If you want a user to enter a password when

trying to access setup, set a user’s password with the “Setup” option

selected in the BIOS Features Setup. Using user’s password to enter

Setup allows a user to access only the “User Password” option that

appears on the main screen. Access to all other options is denied. To

set, confirm, verify, disable or delete a user’s password, follow the

procedures described in the section “Supervisor Password”. If you

forget your password, refer to the procedure described in the same

section.