Black Box 5250 사용자 설명서
89
5250 REMOTE EMULATOR CARD
Device ID in Configuration File is Invalid:
An incorrect device was found
while processing the configuration file. Verify the device in the
configuration file and, if necessary, delete and recreate the file.
configuration file and, if necessary, delete and recreate the file.
Emulation Adaptor Does Not Respond:
The 5250 Remote Emulator Card
has detected a problem. Power OFF the PC and restart emulation. If the
problem persists, verify the hardware configuration. If it is correct, contact
your supplier.
problem persists, verify the hardware configuration. If it is correct, contact
your supplier.
Emulation Adaptor Diagnostic Error:
The Card detects an error during
power up. Power OFF the PC and restart emulation. If the problem
persists, contact your supplier.
persists, contact your supplier.
Error Reading Keyboard Definition File:
The emulation software cannot
read the keyboard-definition file. Verify that the current disk and directory
are correct. If so, verify that the 5250 Remote Emulator Card’s software
diskette contains the three files KEYBOARD.BAS, KEYBOARD.CHG, and
KEYBOARD.DEF. If it doesn’t, contact your supplier.
are correct. If so, verify that the 5250 Remote Emulator Card’s software
diskette contains the three files KEYBOARD.BAS, KEYBOARD.CHG, and
KEYBOARD.DEF. If it doesn’t, contact your supplier.
Error Reading Printer Definition File:
The emulator software cannot read
the printer-definition file. Verify that the current disk and directory are
correct; if so, check the configuration and make sure that the printer is
correctly configured. If the problem persists, reinstall the software.
correct; if so, check the configuration and make sure that the printer is
correctly configured. If the problem persists, reinstall the software.
Keyboard Definition File is Invalid:
The data in the keyboard-definition file
is incorrect. Recopy the three files KEYBOARD.BAS, KEYBOARD.CHG,
and KEYBOARD.DEF from the 5250 Remote Emulator Card’s software
diskette. If this doesn’t help, briefly switch to another keyboard language
and then switch back to your desired language; these three files will be
overwritten and then recreated.
and KEYBOARD.DEF from the 5250 Remote Emulator Card’s software
diskette. If this doesn’t help, briefly switch to another keyboard language
and then switch back to your desired language; these three files will be
overwritten and then recreated.
Keyboard Definition File Not Found:
The emulation software is unable to
locate the keyboard-definition file. If the current disk and directory are
correct, copy the three files KEYBOARD.BAS, KEYBOARD.CHG, and
KEYBOARD.DEF from the 5250 Remote Emulator Card’s software diskette
into the current disk and directory.
correct, copy the three files KEYBOARD.BAS, KEYBOARD.CHG, and
KEYBOARD.DEF from the 5250 Remote Emulator Card’s software diskette
into the current disk and directory.
Printer Definition File Not Found:
The emulation software is unable to
locate the printer-definition file. Verify the printer configuration; if it is
correct, reinstall the emulation software.
correct, reinstall the emulation software.