IBM SBC-658 사용자 설명서

                   16   SBC-658  User Manual

3. Press the lever down.  The plate will slide forward.  You will feel

some resistance as the pressure starts to secure the CPU in the

socket.  This normal and won't damage the CPU.

When the CPU is installed, the lever should snap into place at the

side of the socket.
Note:

To remove a CPU, pull the lever out to the side a

little and raise it as far as it will go.  Lift out the

CPU chip.

When you install a new CPU, be sure  to adjust the board settings,

such as CPU type and CPU clock.  Improper settings may damage

the CPU.