IBM 7RY 사용자 설명서
Symptom-to-FRU index
153
Error symptoms
264-XXX-0NN
(NN = SCSI ID
of failing Tape Drive)
1.
Tape Cartridge, if user executed the Read/Write Tape
Drive test (XXX = 256)
Drive test (XXX = 256)
2.
SCSI or power cable connected to the tape drive with
SCSI ID NN
SCSI ID NN
3.
Tape drive with SCSI ID NN – refer to Help and
Service Information appendix of tape drive’s User
Guide.
Service Information appendix of tape drive’s User
Guide.
4.
I/O Legacy Board or SCSI Controller – run SCSI
Controller diagnostic to determine of SCSI bus is
functioning properly.
Controller diagnostic to determine of SCSI bus is
functioning properly.
264-XXX-999
(Errors on
multiple tape drives, see error
text for more info)
text for more info)
1.
See error messages/text in the PC Doctor error log for
detailed information on each individual tape drive
error.
detailed information on each individual tape drive
error.
301-XXX-000
(Failed Keyboard
test)
1.
Keyboard
405-XXX-000
(Failed Ethernet
test on controller on the I/O
Legacy Board)
Legacy Board)
1.
Verify that Ethernet is not disabled in BIOS.
2.
I/O Legacy Board
405-XXX-00N
(Failed Ethernet
test on adapter in PCI slot N)
Note:
Insure modem is
present and attached to
server.
present and attached to
server.
1.
Adapter in PCI slot N.
2.
I/O Legacy Board
415-XXX-000
(Failed Modem
test)
1.
Cable
2.
Modem
3.
I/O Legacy Board
Error Symptom
FRU/Action
CD is not working properly.
1.
Clean the CD.
2.
Run CD-ROM diagnostics.
3.
CD-ROM Drive
CD-ROM drive tray is not
working.
working.
(The server must be
powered-on.)
1.
Insert the end of a paper clip into the manual tray-
release opening.
release opening.
2.
Run CD-ROM diagnostics.
3.
CD-ROM Drive
CD-ROM drive is not recognized.
1.
Run Configuration/Setup, enable primary IDE
channel.
channel.
2.
Check cables and jumpers.
3.
Check for correct device driver.
4.
Run CD-ROM diagnostics.
5.
CD-ROM drive
6.
I/O Legacy Board
Error Code/Symptom
FRU/Action