IBM 7RY 사용자 설명서
60
Hardware Maintenance Manual: xSeries 250
To remove the server top cover:
1.
Loosen the two thumbscrews on the back edge of the top cover.
2.
Slide the top cover slightly toward the rear of the server. Lift the cover off the
server and set the cover aside.
server and set the cover aside.
Attention:
For proper cooling and airflow, replace the top cover before turning
on the server. Operating the server for extended periods of time
(over 30 minutes) with the top cover removed might damage server
components.
on the server. Operating the server for extended periods of time
(over 30 minutes) with the top cover removed might damage server
components.
Removing the media-bay bezel
To remove the media-bay bezel:
1.
Release the two tabs at the bottom edge of the media-bay bezel and pull the
bottom of the bezel slightly away from the server.
bottom of the bezel slightly away from the server.
2.
Pull the media-bay bezel down to release the two tabs at the top edge of the bezel.
Store the bezel in a safe place.
Store the bezel in a safe place.
Removing the front trim bezel
∼1∼ Side
tabs
Media-bay bezel