Intel 80L188EC 사용자 설명서

3-3

The memory on the evaluation board can be divided into three types: Flash, SRAM, and
expansion. Flash memory contains the Flash loader utility, located in the boot block boundary,
and the RISM monitor program, beginning at F800:0000. Users can execute their test code from
boot-up using the Flash loader utility. Refer to the CQI Flash Loader Reference Manual for
instructions on programming the Flash memory. SRAM memory is used for the processor
interrupt vector table, stack allocation, and RISM data variables, and as a possible destination for
user-written code downloaded on the host interface. Expansion memory can be accessed through
the expansion interface, if required.

Table 3-2 shows the logical memory map and Figure 3-1 shows the physical memory map of the
evaluation board.

SRAM

0000:0000

2000:0000

128 Kbytes

Flash

8000:0000

F000:FFFF

512 Kbytes

Flash Boot Block

FC00:0000

F000:FFFF

16 Kbytes

Expansion

4000:0000

8000:0000

256 Kbytes

LCD (I/O)

0000:0400

0000:0440

64 bytes