Samsung spinpoint v40 사용자 설명서

다운로드
페이지 115
DISK DRIVE OPERATION 
 
SpinPoint V40 Product Manual
 
107
CHAPTER 7  MAINTENANCE 
 
7.1 General 
Information 
 
Samsung's SpinPoint V40 hard disk drives achieve high reliability through their mechanical design and 
extensive use of microelectronics. Their design allows fast, easy sub-assembly replacement without 
adjustments, greatly reducing the amount of downtime required for unscheduled repairs. 
 
 
7.2 Maintenance 
Precautions 
 
When servicing a drive, the service technician should observe the following precautions to avoid damage to 
the drive or personal injury. 
 
(1)  Do not attempt to open the sealed compartment of the SpinPoint V40, as this will void the 
warranty and contaminate the media. 
 
(2)  Do not lift the SpinPoint V40 by the bezel or by the PCB. 
 
(3)  Avoid harsh shocks or vibration to the drive at all times. 
 
(4)  Avoid static discharge when handling the SpinPoint V40 drives 
 
(5)  Do not touch the components on the PCB. 
 
(6)  Observe the environmental limits specified for this product, as listed in section 3.6. 
 
(7)  If it becomes necessary to move your computer system, turn off the power to automatically 
park the heads. Parking the heads moves the heads to a safe, non-data landing zone and locks 
the heads in place. This helps prevent the media and the heads from accidental damage due to 
vibration, moving or shipping. Do not move the drive for 20 seconds after removing DC 
power to ensure that the actuator is completely locked. 
 
Back up your data regularly. Samsung assumes no responsibility for loss of data. For information about back-
up and restore procedures, consult your DOS manual. There are also a number of utility programs available 
that you can use to back up your data. 
 
7.3 
Service And Repair 
 
The service and repair of the SpinPoint V40 can be done at a Samsung Service Center. Please contact your 
representative for warranty information and service/return procedures.