RoboteQ AX1500 사용자 설명서
AX1500 Motor Controller User’s Manual
71
Cable Length and Noise Considerations
Cable Length and Noise Considerations
Cable should not exceed one 3’ (one meter) to avoid electrical noise to be captured by the
wiring. A ferrite core filter must be used for length beyond 2’ (60 cm). For longer cable
length use an oscilloscope to verify signal integrity on each of the pulse channels and on
the power supply.
wiring. A ferrite core filter must be used for length beyond 2’ (60 cm). For longer cable
length use an oscilloscope to verify signal integrity on each of the pulse channels and on
the power supply.
TABLE 12. Encoder Connector Pinout
Pin
Name
Cable Color
(when using standard network cable)
1
Encoder 2 - Channel B. Optional Limit Switch 4
Orange/White
2
Encoder 2 - Channel A. Optional Limit Switch 3
Orange
3
Ground (same as pin 7)
Green/White
4
5V Out (same as pin 8)
Blue
5
Encoder 1 - Channel B. Optional Limit Switch 2
Blue/White
6
Encoder 1 - Channel A. Optional Limit Switch 1
Green
7
Ground (same as pin 3)
Brown/White
8
5V Out (same as pin 4)
Brown
1
1
8
8
FIGURE 40. Encoder connector
Ferrite Core
Encoder
FIGURE 41. Use ferrite core on cable length beyond 2’ or 60cm