Renesas H8SX/1520 사용자 설명서

15 

 

Section 5   Notice 

1.  Make sure that pin 1 on the user system IC socket is correctly aligned with pin 1 on the cable head 

before inserting the cable head into the user system IC socket. 

2.  This user system interface cable is specifically designed for the HS1527KEPH60H emulator.  Do 

not use this cable with any other emulator station.   

3.  To prevent breaking of wires in the cable body, do not place heavy or sharp metal objects on the 

user system interface cable. 

4.  While the emulator station is connected to the user system with the user system interface cable, 

force must not be applied to the cable head.  Place the emulator station, user system interface 
cable, and user system as shown in the example in figure 10. 

User system

Cable

Emulator's front-end unit

Place components so that the cable body and cable head are 
parallel to the user system.

Cable head is parallel 

to emulator station

Cable head is parallel 

to user system

 

5.  The P1 short connector is used for testing.  Do not remove the jumper pin that is inserted in 

the side of pins 1 and 2. 

P1

3

1

P4

1

3