DFI PM12-EL 사용자 설명서
51
3
Award BIOS Setup Utility
CGA 80
Color Graphics Adapter. Power up in 80-column
mode.
mode.
Mono
Monochrome adapter. Includes high resolution
monochrome adapters.
monochrome adapters.
3.1.1.6 Halt On
This field determines whether the system will stop if an error is
detected during power up. The default setting is All Errors.
detected during power up. The default setting is All Errors.
No Errors The system boot will not stop for any errors detected.
All Errors The system boot will stop whenever the BIOS detects
All Errors The system boot will stop whenever the BIOS detects
a non-fatal error.
All, But Keyboard
The system boot will not stop for a keyboard
error; it will stop for all other errors.
error; it will stop for all other errors.
All, But Diskette
The system boot will not stop for a disk error ;
it will stop for all other errors.
it will stop for all other errors.
All, But Disk/Key
The system boot will not stop for a disk or
keyboard error; it will stop for all other errors.
keyboard error; it will stop for all other errors.
3.1.1.7 Base Memory
Displays the amount of base (or conventional) memory installed in
the system. The value of the base memory is typically 512K for
systems with 512K memory installed on the motherboard or 640K
for systems with 640K or more memor y installed on the
motherboard.
the system. The value of the base memory is typically 512K for
systems with 512K memory installed on the motherboard or 640K
for systems with 640K or more memor y installed on the
motherboard.
3.1.1.8
Extended Memory
Displays the amount of extended memory detected during boot-up.
3.1.1.9
Total Memory
Displays the total memor y available in the system.