DFI PM12-EL 사용자 설명서
80
3
Award BIOS Setup Utility
3.1.7 Frequency/Voltage Control
The settings on the screen are for reference only. Your version may not be
identical to this one.
identical to this one.
Phoenix - AwardBIOS CMOS Setup Utility
Frequency/Voltage Control
CPU Clock Ratio
Auto Detect PCI/DIMM Clk
Spread Spectrum
CPU Clock
Auto Detect PCI/DIMM Clk
Spread Spectrum
CPU Clock
8 X
Enabled
Enabled
100MHz
Enabled
Enabled
100MHz
Item Help
Menu Level
↑↓→← Move
F6:Fail-Safe Defaults
F7:Optimized Defaults
F1:General Help
Enter:Select
F5:Previous Values
+/-/PU/PD:Value F10:Save
ESC:Exit
3.1.7.1 CPU Clock Ratio
This field is used to select the CPU’s frequency ratio.
Important:
The frequency ratio of some processors may have been locked
by the manufacturer. If you are using this kind of processor,
setting an extended ratio for the processor will have no effect.
The system will instead use its factor y default ratio.
The frequency ratio of some processors may have been locked
by the manufacturer. If you are using this kind of processor,
setting an extended ratio for the processor will have no effect.
The system will instead use its factor y default ratio.
3.1.7.2
Auto Detect PCI/DIMM Clk
When enabled, the system will automatically send clock signals to
existing PCI or DIMM devices.
existing PCI or DIMM devices.
3.1.7.3 Spread Spectrum
Leave this field in its default setting. Do not alter this setting unless
advised by an engineer or technician.
advised by an engineer or technician.