DFI G586OPC 사용자 설명서

1. Before installing the optional synchronous pipeline burst

cache module, make sure that:

- the cache chips have been removed from the

SRAM sockets U23 (Tag RAM) and U28-U35;

- Jumpers JP12-JP15 have been set properly (page

26).

2. Locate the 160-pin cache module slot on the system

board. Position the cache module above the slot. Make
sure pin 1 of the cache module is aligned with pin 1 of
the slot. Carefully slide the module into the slot. Press
firmly on the top of it to seat it properly.

Note:
With the optional synchronous pipeline burst cache
module installed in the cache module slot, the length of
the add-in card in PCI Slot 2 is limited to 124,65 mm.