Gigabyte AGP 4X(1.5V) 사용자 설명서
- 12 -
GA-8PE667 Ultra2 / Pro Motherboard
English
Step 1: Install the Central Processing Unit (CPU)
Step 1-1: CPU Installation
Pin1 indicator
3. CPU Top View
2. Pull the rod to the 90-degree directly.
4. Locate Pin 1 in the socket and look
for a (golden) cut edge on the CPU
upper corner. Then insert the CPU
into the socket.
upper corner. Then insert the CPU
into the socket.
Angling the
rod to 65
rod to 65
0
Socket
Actuation
Lever
Actuation
Lever
Pin1 indicator
1. Angling the rod to 65-degree maybe feel a
kind of tight , and then continue pull the rod
to 90-degree when a noise “cough” made.
to 90-degree when a noise “cough” made.
Before installing the processor , adhere to the following warning:
If you do not match the CPU socket Pin 1 and CPU cut edge well, it will
cause improper installation. Please change the insert orientation.
Please make sure the CPU type is supported by the motherboard.
cause improper installation. Please change the insert orientation.
Please make sure the CPU type is supported by the motherboard.