Gigabyte AGP 4X(1.5V) 사용자 설명서

Introduction

- 5 -

Form Factor

30.5cm x 24.4cm ATX size form factor, 4 layers PCB.

Motherboard

GA-8PE667 Series Motherboard:
GA-8PE667 Ultra2 and GA-8PE667 Pro

CPU

Socket 478  for Intel

®

 Micro FC-PGA2 Pentium

®

 4 processor

Intel Pentium

®

4  533MHz/400MHz FSB

Support Intel 

®

 Pentium 

®

 4 (Northwood, 0.13 m) processor

 

Support Intel 

®

 Pentium 

®

 4 Processor with HT Technology

2nd cache depend on CPU

Chipset

Chipset 845PE HOST/AGP/Controller
ICH4 I/O Controller Hub

Memory

3  184-pin DDR DIMM sockets
Supports DDR333/DDR266 DDR DIMM
Supports up to 2GB DRAM (Max)
Supports only 2.5V DDR DIMM

I/O Control

ITE8712

Slots

1 CNR(Communication and Networking Riser) Slot **
1 AGP slot 4X (1.5V only) device support
6 PCI slot supports 33MHz & PCI 2.2 compliant

On-Board IDE

2 IDE controllers on the Intel ICH4 PCI chipset
provides IDE HDD/CD-ROM (IDE1, IDE2) with PIO, Bus Master
(Ultra DMA33/ATA66/ATA100) operation modes.
IDE3 and IDE4 Compatible with RAID,Ultra ATA133/100.**

On-Board Peripherals

1 Floppy port supports 2 FDD with 360K, 720K,1.2M, 1.44M
 and 2.88M bytes.
1 Parallel port supports Normal/EPP/ECP mode
2 Serial ports (COMA & COMB)
6 USB 2.0/1.1

 (2 port rear,4 ports by cable)

1 IrDA connector for IR/CIR
1 Front Audio connector

to be continued......

Due to (Intel 845PE/GE/GV) chipset architecture limitation, DDR 333 memory module is
only supported when using FSB 533 Pentium 4 processor. A FSB 400 Pentium 4 processor
will only support DDR 266 memory module

* For GA-8PE667 Pro Only  ** For GA-8PE667 Ultra2 Only