Gigabyte 7VM400M-RZ 사용자 설명서

- 29 -

BIOS Setup

Disabled

Disable this function.

Enabled

Auto detect PCI/DIMM clock. (Default value)

Disabled

Disable this function.

Enabled

Enable clock spread spectrum. (Default value)

Note: If system hangs up before enter CMOS setup utility, wait for 20 sec for times out reboot.

When time out occur, system will reset and run at CPU default Host clock at next boot.

Disabled

Disable CPU Host Clock Control. (Default value)

Enabled

Enable CPU Host Clock Control.

133MHz ~ 165MHz

Set CPU Host Clock from 100MHz to 165MHz.

Wrong frequency may make system can't boot, clear CMOS to overcome wrong frequency issue.

By SPD

Set memory frequency by DRAM SPD data. (Default value)

133-DDR266

If you use DDR266 DRAM module, please set at "133-DDR266".

166-DDR333

If you use DDR333 DRAM module, please set at "166-DDR333".

Increase AGP voltage may get stable for over-clock. But it may damage to AGP card when enable

this feature.

Auto

Supply voltage as AGP required. (Default value)

+0.1V

Increase AGP voltage +0.1V.

+0.2V

Increase AGP voltage +0.2V.

+0.3V

Increase AGP voltage +0.3V.

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

Frequency/Voltage Control

Auto Detect PCI/DIMM Clk

[Enabled]

Spread Specturm

[Enabled]

CPU Host Clock Control

[Disabled]

x

CPU Clock

133MHz

DRAM Clock(MHz)

[By SPD]

AGP OverVoltage Control

[Auto]

DIMM OverVoltage Control

[Auto]

KLJI: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Safe Defaults

F7: Optimized Defaults

Item Help

Menu Level

`

Incorrect using these features may cause your system broken. For power End-User use only!