DCS Digital to Digital Converter 사용자 설명서
dCS 974 User Manual
Manual for Software Version 1.0x
dCS Ltd
May 2001
Manual part no: DOC1241121A1
Page 10
Document No: OS-MA-A0124-112.1A1
Contact
dCS
on + 44 1799 531 999
email to: more@dcsltd.co.uk
(inside the UK replace + 44 with 0)
web site: www.dcsltd.co.uk
S
TEP
-
BY
-S
TEP
G
UIDE
This section guides you through setting up the unit for basic operation. You may
find this useful if you have not used the dCS 974 for a while.
find this useful if you have not used the dCS 974 for a while.
Preliminaries
The Quick Start Guide sheet details the menu structure and outlines the use of
the front panel controls. For more information, see
the front panel controls. For more information, see
on page
and
on page
. We will be changing settings in either the
Sample Rate Conversion
menu or the
Format Conversion
menu. Use the
rotary control to scroll up and down the screen and the
Operation
buttons to
change menu levels or select items.
Connect up with cables designed for digital audio:
• for AES/EBU interfaces use 110Ω screened, twisted pair cables fitted with
one male XLR connector and one female XLR connector.
• for DSD/SDIF or SPDIF BNC interfaces, use 75Ω coax cables fitted with
BNC plugs.
• for SPDIF RCA interfaces, use 75Ω coax cables fitted with RCA Phono
plugs.
• for SPDIF TOS interfaces, use Toslink fibre-optic cables.
Power up the unit and wait for about 20 seconds while it configures itself. The
screen will show:
Power up the unit and wait for about 20 seconds while it configures itself. The
screen will show:
Press the
Recall
button. When the screen displays the
Recall Setup
list, press
the
Recall
button again to change to the preset setup list, then press the
Enter
button. Wait while the unit loads the default setup (
Store A
) then displays a
Status
screen similar to this:
The
Power
and
Unlocked
indicators should be lit, the other indicators should
be off.