Emerson MVME7100 사용자 설명서
MVME7100 Single Board Computer Installation and Use (6806800E08A)
Controls, LEDs, and Connectors
Headers
64
3.3.3.8
USB Connector (J2)
There is one USB Type A connector located on the MVME7100 front panel. The pin
assignments are as follows:
assignments are as follows:
3.4
Headers
This section describes the pin assignments of the Headers on the MVME7100.
3.4.1
Processor COP Header (P4)
There is one standard 16-pin header that provides access to the COP function. The pin
assignments for this header are as follows:
assignments for this header are as follows:
Pin 6 +3.3V has a 100
Ω resistor to +3.3V.
61
No Connect
No Connect
62
63
No Connect
No Connect
64
Table 3-15 MVME721 Host I/O Connector (J10) Pin Assignments (continued)
Pin
Signal
Signal
Pin
Table 3-16 USB Connector (J2) Pin Assignments
Pin
Signal
1
USB_VBUS (+5.0V)
2
USB_DATA-
3
USB_DATA+
4
GND
Table 3-17 Processor COP Header (P4) Pin Assignments
Pin
Signal
Signal
Pin
1
CPU_TDO
No Connect
2
3
CPU_TDI
CPU_TRST_L
4
5
Pullup
CPU_VIO (+3.3V)
6
7
CPU_TCK
CPU_CKSTPI_L
8
9
CPU_TMS
No Connect
10
11
CPU_SRST_L
GND
12
13
CPU_HRST_L
KEY (no pin)
14
15
CPU_CKSTPO_L
GND
16