Emerson MVME7100 사용자 설명서

다운로드
페이지 106
MVME7100 Single Board Computer Installation and Use (6806800E08A)
MOTLoad Firmware
Boot Images
94
 
For further details on CR/CSR space, please refer to the VME64 Specification, listed in 
Appendix B, Related Documentation
.
The MVME7100 uses a TSi148 for its PCI/X-to-VME bus bridge. The offsets of the mailboxes 
in the TSi148 are defined in the TSi148 VMEBus PCI/X-to-VME User Manual, listed in 
Appendix B, Related Documentation
, but are noted here for reference:
Mailbox 0 is at offset 7f610 in the CR/CSR space
Mailbox 1 is at offset 7f614 in the CR/CSR space
Mailbox 2 is at offset 7f618 in the CR/CSR space
Mailbox 3 is at offset 7f61C in the CR/CSR space
The selection of the mailbox used by remote start on an individual MVME7100 is determined 
by the setting of a global environment variable (GEV). The default mailbox is zero. Another GEV 
controls whether remote start is enabled (default) or disabled. Refer to the Remote Start 
appendix in the MOTLoad Firmware Package User's Manual for remote start GEV definitions.
The MVME7100’s IBCA needs to be mapped appropriately through the master’s VMEbus 
bridge. For example, to use remote start using mailbox 0 on an MVME7100 installed in slot 5, 
the master would need a mapping to support reads and writes of address 0x002ff610 in VME 
CR/CSR space (0x280000 + 0x7f610).
6.7
Boot Images
Valid boot images whether POST, USER, or Alternate MOTLoad, are located on 1 MB 
boundaries within the upper 8 MB of flash. The image may exceed 1 MB in size. An image is 
determined valid through the presence of two "valid image keys" and other sanity checks. A 
valid boot image begins with a structure as defined in the following table:
7
0x0038.0000
8
0x0040.0000
9
0x0048.0000
A
0x0050.0000
B
0x0058.0000
C
0x0060.0000
CS/CSR Starting Address
Slot Position
Name
Type
Size
Notes
UserDefined
unsigned integer
8
User defined
ImageKey 1
unsigned integer
1
0x414c5420
ImageKey 2
unsigned integer
1
0x424f4f54
ImageChecksum
unsigned integer
1
Image checksum
ImageSize
unsigned integer
1
Must be a multiple of 4
ImageName
unsigned character
20
User defined
ImageRamAddress
unsigned integer
1
RAM address